HTA HT2800T - Page 121

HT2800T_en_c.doc Page 121 of 275
• rotate the turret to the right hand side (▲) or to the left hand side (▼);
• move the tray towards the open (▼) or towards the closed position (▲);
• open (▲) or close (▼) the oven cover;
• increase (▲) or decrease (▼) the shaker;
• increase and start (▲) or decrease and stop (▼) the fan.
Besides the plunger, needle, turret and tray motor, it is written its
status:
Run
When the motor is moving
Idle
When the
motor
is
not
moving
Error
An error
occurred
in
the movement
The status of the oven cover can be:
Open
The oven cover is open (not suitable for conditioning)
Moving
The oven cover is moving
Close
The oven cover is closed (suitable for conditioning)
The status of the shaker can be:
Off
The shaker is not active
Very Low clockwise
The shaker is active (very low speed). Clockwise rotation.
Low clockwise
The shaker is active (low speed). Clockwise rotation.
Medium clockwise
The shaker is active (medium speed). Clockwise rotation.
High clockwise
The shaker is active (high speed). Clockwise rotation.
Very High clockwise
The shaker is active (very high speed). Clockwise rotation.
Very Low anti clockwise
The shaker is active (very low speed). Anticlockwise rotation.
Low anticlockwise
The shaker is active (low speed). Anticlockwise rotation.
Medium anticlockwise
The shaker is active (medium speed). Anticlockwise rotation.