HTA HT2800T - Page 270

HT2800T_en_c.doc Page 270 of 275
FIGURE INDEX
Figure
1
: Top view (tray open)
Figure 2: Top view (tray closed) 21
Figure 3: 42 position rack (Headspace and SPME) 22
Figure 4: 121 position rack (liquid mode) 23
Figure 5: HT2800T/HT2850T Incubation oven/ Location for solvent vial 25
Figure 6: Left location for incubation oven/location for solvent vials (bottom view) 26
Figure 7: Right location for incubation 26
Figure 8: Touch screen display 26
Figure 9: Sliding lid down 27
Figure 10: Sliding lid up 27
Figure 11: Syringe location (Headspace mode) 28
Figure 12: Syringe warmer assembly (Headspace mode) 29
Figure 13: Vial locator (Headspace ans SPME mode) 29
Figure 14: “S” side of the plunger locker Figure 15: “B” side of the syringe locker
29
Figure 16: Syringe location (liquid mode) Figure 17: Syringe location (liquid mode
with syringeID system installed) 30
Figure 18: Syringe holder (liquid mode) 31
Figure 19: Syringe holder (liquid mode with syringeID system installed)31
Figure 20: Syringe locker (liquid mode) 32
Figure
21
: “S” side of the plunger locker
Figure 22: “B” side of the syringe locker
32
Figure 23: Standard vial locator (liquid mode) 32
Figure 24: Vial locator with gripper 33
Figure 25: Fiber holder location (SPME mode) 34
Figure 26: Vial locator (Headspace and SPME mode) 34
Figure 27: “S” side of the plunger locker Figure 28: “B” side of the syringe locker
35
Figure 29: Connection panel 35
Figure 30: External power supply 36
Figure 31: Syringe pointer 37
Figure 32: Allen key 38
Figure 33: Tweezer_type 2 38
Figure 34: Screen type 1 39
Figure 35: Screen type 1_example A Figure 36: Screen type 1_example B 40
Figure 37: Screen type 3_example A 40
Figure 38: Screen type 4 41
Figure 39: Screen type 5_example A 41
Figure 40: Screen type 5_example B 41
Figure 41: Screen type 6_example A Figure 42: Screen type 6_example B 42
Figure 43: Open the box 45
Figure 44: Remove the cushions 45