HT2800T_en_c.doc Page 74 of 275
4) Remove the upper part of the Syringe integrity tool (as indicated in the figure below):
Figure 84: System integrity tool installation_1
5) Insert the septum (indicated with the letter A in the figure below) in the lower part of the Syringe
integrity tool:
Figure 85: System integrity tool installation_2
6) Screw by hands the upper part (indicated with the letter B in the figure below) of the Syringe
integrity tool to the lower part (indicated with the letter C in the figure below):
To Next Page
Loading...
