Huawei Quidway S3000-EI Series User Manual

Operation Manual - Getting Started
Quidway S3000-EI Series Ethernet Switches Chapter 3
Command Line Interface
Huawei Technologies Proprietary
3-2
z System level: Service configuration commands, including routing command and
commands on each network layer, are used to provide direct network service to
z n of the
system and system support module, which plays a support role on service.
ve file system commands, FTP commands, TFTP
ading commands, user management commands,
and level setting commands.
r users of different levels log in, they can only use
commands at the levels that are equal to or lower than its own level.
sion, user will be identified when
itc nd. User ID
is needed (Suppose the user has set the
conf the screen the user cannot see the password that he entered. Only
Othe l user level will remain unchanged.
fe ents. They
r u will enter user
w he running
in wh
view
ng views:
z
z
z
z
z
z
z
ew
z Advanced ACL view
the user.
Management level: They are commands that influence basis operatio
Commands of this level invol
commands, XModem downlo
At the same time, login users are classified into four levels that correspond to the four
command levels respectively. Afte
In order to prevent unauthorized users from illegal intru
sw hing from a lower level to a higher level with super [ level ] comma
authentication is performed when users at lower level switch to users at higher level. In
other words, user password of the higher level
super password [ level level ] { simple | cipher } password.) For the sake of
identiality, on
when correct password is input for three times, can the user switch to the higher level.
rwise, the origina
Dif rent command views are implemented according to different requirem
are elated to one another. For example, after logging in the switch, yo
vie , in which you can only use some basic functions such as displaying t
state and statistics information. In user view, key in system-view to enter system view,
ich you can key in different configuration commands and enter the corresponding
s.
The command line provides the followi
z User view
z System view
z Ethernet Port view
VLAN view
z VLAN interface view
z LoopBack interface view
z Local-user view
User interface view
FTP Client view
Cluster view
z MST region view
RSA public key view
RSA key code view
Basic ACL vi

Huawei Quidway S3000-EI Series Specifications

General

Brand	Huawei
Model	Quidway S3000-EI Series
Category	Switch
Language	English