Operation Manual - Security
Quidway S3000-EI Series Ethernet Switches
Chapter 2 AAA and RADIUS Protocol
Configuration
Huawei Technologies Proprietary
2-9
string ID delivered from the server with the
VLAN names existing on the switch. If a matching entry is found, the switch adds
the delivery fails and the user

z String ID: The switch compares the
the port into the corresponding VLAN. Otherwise,
cannot pass the authentication.
Note:
z delivery mode, the VLAN to be delive e on
nd configured a name for it on
o such a restri er mode.
z ule in handling strings: If the
IUS server delivers VLANs with full g IDs (1024 for example) and
and add the a ponding
For the string red must be an existing on
the switch. That is, you must h
the switch. There is n
ave created the VLAN a
ction for the integ
For the string delivery mode
RAD
, the switch follows this r
number strin
their converted integer form i
as integer IDs
s within the VLAN range, the switch just handles them
uthentication port to the VLAN with the corres
integer ID. In this example, the port is added into VLAN 1024.
T
z Configuring VLAN delivery
z
I. Configuring
erform the following configuration in ISP domain view.
y mode
he dynamic VLAN with RADIUS server configuration includes:
mode
Configuring name of the delive
VLAN delivery m
red VLAN
ode
P
Table 2-9 Configuring VLAN deliver
Operation Command
Configure VLAN delivery mode as integer
vlan-assignment-mode integer
Configure VLAN delivery mode as string
vlan-assignment-m
ode string
By default, the integer mode is selected, that is, the switch supports the RADIUS server
deliv eger VLAN ID.
II. Configuring name
P wing
Table 2-10 Configuring name of the delivered VLAN
ering the int
of the delivered VLAN
configuration in VLAN view. erform the follo
Operation Command
Configure name of the delivered VLAN
name string
Remove the configured VLAN name
undo name
To Next Page
Loading...
Need help?
General