Operation Manual - System Management
Quidway S3000-EI Series Ethernet Switches Chapter 5 SNMP Configuration
Huawei Technologies Proprietary
5-10
[Quidway-vlan2] port ethernet 0/3
[Quidway-vlan2] interface vlan 2
[Quidway-Vlan-interface2] ip address 129.102.0.1 255.255.255.0
# Set the administrator ID, contact and the physical location of the Ethernet switch.
[Quidway] snmp-agent sys-info contact Mr.Wang-Tel:3306
[Quidway] snmp-agent sys-info location telephone-closet,3rd-floor
# Enable SNMP agent to send the trap to Network Management Station whose ip
address is 129.102.149.23. The SNMP community is public.
[Quidway] snmp-agent trap enable standard authentication
[Quidway] snmp-agent trap enable standard coldstart
[Quidway] snmp-agent trap enable standard linkup
[Quidway] snmp-agent trap enable standard linkdown
[Quidway] snmp-agent target-host trap address udp-domain 129.102.149.23
udp-port 5000 params securityname public
IV. Configure Network Management System
The Ethernet Switch supports Huawei’s iManager Quidview NMS. Users can query and
configure the Ethernet switch through the network management system. For more
about it, refer to the manuals of Huawei’s NM products.
To Next Page
Loading...
