Huawei SmartAX MA5608T User Manual

Item Data Plan for the F01D500
Cabinet
Data Plan for the N66 Cabinet
Digital parameter ID: 2
This digital parameter is set
according to the actual
requirements.
Valid level of digital parameter 2:
low level
When the low level represents the
valid level, the host does not report
an alarm in the case of low level.
Digital parameter ID: 2
This digital parameter is set according
to the actual requirements.
Valid level of digital parameter 2: low
level
When the low level represents the valid
level, the host does not report an alarm
in the case of low level.
Digital parameter ID: 3
This digital parameter is set
according to the actual
requirements. The monitoring
digital parameter of the surge
protector is set here to monitor the
status of the surge protector. When
the surge protector is faulty, the
host reports an alarm.
Valid level of digital parameter 3:
low level
When the low level represents the
valid level, the host does not report
an alarm in the case of low level.
Digital parameter ID: 3
This digital parameter is set according
to the actual requirements. The
monitoring digital parameter of the
surge protector is set here to monitor the
status of the surge protector. When the
surge protector is faulty, the host
reports an alarm.
Valid level of digital parameter 3: low
level
When the low level represents the valid
level, the host does not report an alarm
in the case of low level.
Digital parameter ID: 4
This digital parameter is set
according to the actual
requirements. The monitoring
digital parameter of the smoke
sensor is set here to monitor
whether there is smoke in the actual
environment. When there is smoke,
the host reports an alarm.
Valid level of digital parameter 4:
high level
When the high level represents the
valid level, the host does not report
an alarm in the case of high level.
Digital parameter ID: 4
This digital parameter is set according
to the actual requirements. The
monitoring digital parameter of the
smoke sensor is set here to monitor
whether there is smoke in the actual
environment. When there is smoke, the
host reports an alarm.
Valid level of digital parameter 4: high
level
When the high level represents the valid
level, the host does not report an alarm
in the case of high level.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide 1 Commissioning
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
101

Huawei SmartAX MA5608T Specifications

General

Dual Power Supply	Yes
Humidity	5% to 95% (non-condensing)
Uplink Slots	2
Maximum GPON Ports	16
Input Voltage Range	-38.4 V DC to -72 V DC
Device Type	OLT
Power Supply	-48 V DC
Operating Temperature	-25°C to +55°C
Storage Temperature	-40°C to 70°C
Switching Capacity	128 Gbps
Ports	GPON, XG-PON, 10GE