2. After the backup is completed, you can locate the file backed up in the path that you set in
the FTP tool.
Example
Manually saving data
Select one of the following modes to save the database file or the configuration file.
l To save the database file in the system, do as follows:
huawei(config)#save data
The data is being saved, please wait a moment...
huawei(config)#
1 [2010-07-12 14:32:00+08:00]:The percentage of saved data on 9 slot's main
control board is: 21%
huawei(config)#
1 [2010-07-12 14:32:03+08:00]:The percentage of saved data on 9 slot's main
control board is: 27%
huawei(config)#
1 [2010-07-12 14:32:06+08:00]:The percentage of saved data on 9 slot's main
control board is: 66%
huawei(config)#
1 [2010-07-12 14:32:09+08:00]:The percentage of saved data on 9 slot's main
control board is: 72%
huawei(config)#
1 [2010-07-12 14:32:12+08:00]:The percentage of saved data on 9 slot's main
control board is: 96%
huawei(config)#
1 [2010-07-12 14:32:15+08:00]:The percentage of saved data on 9 slot's main
control board is: 98%
huawei(config)#
1 [2010-07-12 14:32:18+08:00]:The percentage of saved data on 9 slot's main
control board is: 98%
huawei(config)#
huawei(config)#
1 [2010-07-12 14:32:19+08:00]:The data of 9 slot's main control board is
saved
completely
l To save the configuration file in the system, do as follows:
huawei#save configuration
huawei#
It will take several minutes to save configuration file, please wait...
huawei#
Configuration file had been saved successfully
Note: The configuration file will take effect after being activated
l To save the database file and the configuration file in the system, do as follows:
WS6803(config)#save
{ <cr>|configuration<K>|data<K> }:
Command:
save
huawei(config)#
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
1 Commissioning
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
129
To Next Page
Loading...
Need help?
General
