Name: Huawei SmartAX MA5608T
Brand: Huawei
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Figure 1-77 Example network for commissioning the interconnection with the SIP interface

SIP

Access node

10.50.1.10/24

VLAN:50

Router

10.50.1.1/24

Phone

IMS

IP1:10.10.1.1/24

IP2:10.10.1.2/24

Figure 1-78 shows the flowchart for commissioning the interconnection with the SIP interface.

Figure 1-78 Flowchart for commissioning the interconnection with the SIP interface

Prerequisites

l The data configuration on the IMS side (corresponding to the data configuration on the

MA5600T/MA5603T/MA5608T side) must be correct.

l The current system must use the SIP protocol.

NOTE

Run the display protocol support command to query the current voice protocol. If the voice protocol

is not SIP, run the protocol support sip command to change it to SIP.

SmartAX MA5600T/MA5603T/MA5608T Multi-service

Access Module

Commissioning and Configuration Guide

1 Commissioning

Issue 01 (2014-04-30) Huawei Proprietary and Confidential

172

Other manuals for Huawei SmartAX MA5608T

Questions and Answers:

Need help?

Do you have a question about the Huawei SmartAX MA5608T and is the answer not in the manual?

General