l DHCP is recommended for IP Acquisition Mode.
l In case of DS-Lite solution and the Protocol Type in the Basic Information field is
set to IPv6, set the DSLite Work Mode to Auto.
Figure 19-9 shows the parameter settings.
Figure 19-9 Parameter settings on the Web page for the WAN port
3. Click Apply to make the configuration take effect.
----End
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide 19 IPv6 Configuration
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1954
To Previous Page
Loading...
