Figure 1-83 Example network for managing the CPE
Figure 1-84 shows the flowchart for commissioning the management channel to the CPE.
Figure 1-84 Flowchart for commissioning the management channel to the CPE
Prerequisites
You must be logged in to the MA5600T/MA5603T/MA5608T using the maintenance terminal.
Procedure
Step 1 Configure the management IP address of the CPE.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
1 Commissioning
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
183
To Next Page
Loading...
