Intel S2600CP User Manual

Hardware Installations and Upgrades
Intel
®
Server Board S2600CP Intel
®
Server System P4000CP Family Service Guide (Preliminary) 99
8. Correctable Error Threshold
Option Values: 20
10
5
All
None
Help Text:
Threshold value for logging Correctable Errors (CE) – Threshold of 10 (default) logs
10th CE, "All" logs every CE and “None”’ means no CE logging. All and None are not
valid with Rank Sparing.
Comments: Specifies how many Correctable Errors must occur before triggering the
logging of a SEL Correctable Error Event. Only the first threshold crossing is logged, unless “All”
is selected. “All” causes every CE that occurs to be logged. “None” suppresses CE logging
completely.
When Rank Sparing RAS Mode is configured, “All” and “None” are not valid, so they will not be
presented as choices.
This threshold is applied on a per-rank basis. The Correctable Error occurrences are counted for
each memory rank. When any one rank accumulates a CE count equal to the CE Threshold, then
a single CE SEL Event is logged, and all further CE logging is suppressed.
Note that the CE counts are subject to a “leaky bucket” mechanism that reduces the count as a
function of time, to keep from accumulating counts unnecessarily over the term of a long
operational run.
This is also the Correctable Error threshold used when Rank Sparing RAS Mode is configured.
When a CE threshold crossing occurs in Rank Sparing Mode on a channel which is in Redundant
state, it causes a Sparing Fail Over (SFO) event to occur. That threshold crossing will also be
logged as a Correctable Error event if it is the first to occur on the system.
An SFO event causes the rank with the error to be replaced by the spare rank for that channel, and
the channel goes to a non-redundant state (with a “Redundancy Degraded” SEL Event logged).
There may be an SFO for each channel in the system, although only the first one can be logged as
a CE event.
Back to [Memory Configuration Screen] — [Advanced Screen]
9. Memory Power Optimization
Option Values: Power Optimized
Performance Optimized
Help Text:
Power Optimized enables memory power limiting, Performance Optimized disables it for
maximum performance.
Comments: When enabled, the system is configured to allow memory power
management by the Node Manager (NM) and Management Engine (ME).
Back to [Memory Configuration Screen] — [Advanced Screen]

Intel S2600CP Specifications

General

Brand	Intel
Model	S2600CP
Category	Server
Language	English