104
DOLBY DECODER SETTINGS
Figure'70:'Dolby'decod e r'se ttin g s '
• Surround Up-mixer: switch on/off the Dolby surround up-mixer;
• Enable center spread: spread the Center channel across the Left and Right speakers. Creates a wider sound
stage, recommended for playing musical content;
• TrueHD Loudness Management : use the loudness management information provided in the incoming signal’s
metadata;
o DRC Settings:
§ Auto: Automatic DRC low level boost and high level cut;
§ Enabled: Enable the Dynamic Range Control management;
§ Disabled: Disable the Dynamic Range Control management;
o DRC Low-Level Boost: Amount of low-level boost;
o DRC High-Level Cut: Amount of high-level cut;
• Legacy decode: extract the legacy content (5.1 or 7.1) from the incoming Dolby Atmos content.
To Next Page
Loading...
