72
AUDIO CLOCK SETUP
Audio clock setup is available through the Advanced Settings interface of the SDP-75.
To access the clock settings page:
1. Click on the Gears button in the top menu to open the Advanced Settings user interface.
2. Go to the Setup/Clock tab of the graphical user interface.
The Clock page of the Setup tab includes all the clock settings:
Figure#49:#Clock#settings#p ag e #in #th e #A d v anced#Settings #
The Setup/Clock page includes:
• Status Information: the same information provided in the Clock page of the main user interface.
• Clock Mode: slave or master modes.
• Clock Source: one of the digital inputs or the internal Word Clock of the SDP-75.
• Audio Buffer Size: different buffer sizes, used to reduce latency. The buffer can be reduced to 512 samples to
reduce audio latency, but this may cause sync problems. Only recommended for advanced users.
To Next Page
Loading...
