69
Several parameters can be saved, archived and restored using a USB key:
1. Insert a USB key in one of the USB Port located on the rear panel of the SDP-75.
2. As the USB Pop-up menu displays, select the operation you want to execute:
o Save or Load presets to/from the USB Key
o Save or Load profiles (sources configurations) to/from the USB Key
o Save or Load microphone compensation files to/from the USB Key
o Save a Bug report to the USB Key: when an expected error occurs, the system is halted to prevent
damage to your system and a bug report is generated. After the restart of the SDP-75, you can save
that bug report on the USB Key and send it to JBL Synthesis Support at csupport@harman.com.
o Save Screenshots to the USB Key: you can take screenshots of the SDP-75’s Graphical User Interface
by pressing the “print screen” key of a keyboard connected to the SDP-75.
IMPORTANT NOTE: to ensure the data integrity of your USB Key, please press the Close button and wait
until the USB Pop-up menu has disappeared to remove it.
NOTE: be careful when reloading presets from a USB Key: preset are identified by their memory slot.
Therefore, a preset initially saved as preset number 5 would overwrite the preset number 5 stored on
the SDP-75 without warning.
To Next Page
Loading...
