Table 65: DHCP Service Configuration Pages Summary (continued)
Your ActionFunctionField
•
To add a domain name, type the name next
to the Add button, and click Add.
•
To delete a domain name, select the name
in the Domain Search box, and click Delete.
Specifies the order—from top to bottom—in
which clients must append domain names
when resolving hostnames using DNS.
Domain Search
•
To add a DNS server, type an IP address next
to the Add button, and click Add.
•
To remove a DNS server, select the IP
address in the DNS Name Servers box, and
click Delete.
Defines a list of DNS servers that the client can
use, in the specified order—from top to bottom.
DNS Name Servers
•
To add a relay agent, type an IP address next
to the Add button, and click Add.
•
To remove a relay agent, select the IP
address in the Gateway Routers box, and
click Delete.
Defines a list of relay agents on the subnet, in
the specified order—from top to bottom.
Gateway Routers
•
To add a NetBIOS name server, type an IP
address next to the Add button, and click Add.
•
To remove a NetBIOS name server, select
the IP address in the WINS Servers box, and
click Delete.
Defines a list of NetBIOS name servers, in the
specified order—from top to bottom.
WINS Servers
Boot Options
Type a path and filename.Specifies the path and filename of the initial
boot file to be used by the client.
Boot File
Type the IP address or hostname of the TFTP
server.
Specifies the Trivial File Transfer Protocol
(TFTP) server that the client uses to obtain the
client configuration file.
Boot Server
DHCP Static Binding Information
Type the hexadecimal MAC address of the
client.
Specifies the MAC address of the client to be
permanently assigned a static IP address.
DHCP MAC Address
(required)
•
To add an IP address, type it next to the Add
button, and click Add.
•
To remove an IP address, select it in the Fixed
IP Addresses box, and click Delete.
Defines a list of IP addresses permanently
assigned to the client. A static binding must
have at least one fixed address assigned to it,
but multiple addresses are also allowed.
Fixed IP Addresses
(required)
Type a client hostname.Specifies the name of the client used in DHCP
messages exchanged between the server and
the client. The name must be unique to the
client within the subnet on which the client
resides.
Host Name
Type a client identifier in string form.Specifies the name of the client used by the
DHCP server to index its database of address
bindings. The name must be unique to the client
within the subnet on which the client resides.
Client Identifier
125Copyright © 2017, Juniper Networks, Inc.
Chapter 10: Configuring Services
To Next Page
Loading...
