Juniper EX4200 User Manual

The tables in this topic describe the optical interface support over single-mode fiber-optic
(SMF) and multimode fiber-optic (MMF) cables for SFP, SFP+, and XFP transceivers
and over the copper interface for SFP transceivers:
•
Table39 on page 83—Optical interface support and copper interface support for Gigabit
Ethernet SFP transceivers.
•
Table 40 on page 102—Optical interface support for Fast Ethernet SFP transceivers.
•
Table 41 on page 108—Optical interface support for Gigabit Ethernet SFP+ transceivers.
•
Table 42 on page 113—Optical interface support for Gigabit Ethernet XFP transceivers.
Copyright © 2015, Juniper Networks, Inc.82
EX4200 Switch Hardware Guide

Juniper EX4200 Specifications

General

Model	EX4200
Switching Capacity	128 Gbps
Layer	Layer 2 and Layer 3
Form Factor	1U
Throughput	96 Mpps
Maximum VLANs	4096
MAC Address Table Size	16, 000
DRAM	1 GB
Flash Memory	1 GB
Forwarding Rate	96 Mpps
JUNOS Software	Yes
Ports	24 or 48
Stacking	Up to 10 switches in a Virtual Chassis configuration
Power Supply	AC or DC
Management	CLI, SNMP, J-Web
Input Voltage	100-240 VAC or -48 VDC
Operating Temperature	0°C to 45°C
Redundancy	Redundant power supplies
Virtual Chassis Technology	Yes
Storage Temperature	-40°C to 70°C
Humidity	5% to 90% non-condensing