Juniper EX4200 User Manual

PART 4
Installing, Maintaining, and Replacing
Components
•
Replacing Cooling System Component on page 207
•
Replacing Power Supply on page 211
•
Replacing Uplink Module on page 215
•
Replacing Transceiver on page 221
•
Maintaining and Replacing Fiber-Optic Cable on page 227
•
Replacing a Member Switch to Virtual Chassis on page 231
•
Maintaining and Replacing Virtual Chassis Cable on page 241
•
Contacting Customer Support and Returning the Chassis or Components on page 245
205Copyright © 2015, Juniper Networks, Inc.

Juniper EX4200 Specifications

General

Model	EX4200
Switching Capacity	128 Gbps
Layer	Layer 2 and Layer 3
Form Factor	1U
Throughput	96 Mpps
Maximum VLANs	4096
MAC Address Table Size	16, 000
DRAM	1 GB
Flash Memory	1 GB
Forwarding Rate	96 Mpps
JUNOS Software	Yes
Ports	24 or 48
Stacking	Up to 10 switches in a Virtual Chassis configuration
Power Supply	AC or DC
Management	CLI, SNMP, J-Web
Input Voltage	100-240 VAC or -48 VDC
Operating Temperature	0°C to 45°C
Redundancy	Redundant power supplies
Virtual Chassis Technology	Yes
Storage Temperature	-40°C to 70°C
Humidity	5% to 90% non-condensing