CHAPTER 10
Planning the Virtual Chassis
•
Understanding EX4200, EX4500, and EX4550 Virtual Chassis Hardware
Configurations on page 143
•
Planning EX4200, EX4500, and EX4550 Virtual Chassis on page 146
•
Virtual Chassis Cabling Configuration Examples for EX4200 Switches on page 148
Understanding EX4200, EX4500, and EX4550 Virtual Chassis Hardware Configurations
You can interconnect EX4200 switches together to form a Virtual Chassis composed
exclusively of EX4200 switches. You can interconnect EX4500 switches together to
form a Virtual Chassis composed exclusively of EX4500 switches. You can interconnect
EX4550 switches together to form a Virtual Chassis composed exclusively of EX4550
switches. You can also interconnect EX4200 switches with EX4500 switches or with
EX4550 switches or with both switches to form a mixed Virtual Chassis.
This topic covers:
•
Ports Used to Interconnect Virtual Chassis Members on page 143
•
Number of Switches, Required Software Releases, and Member Roles That You
Configure in the Virtual Chassis on page 144
•
Virtual Chassis Module on page 145
•
Switch Role and Member ID on the LCD Panel on page 146
Ports Used to Interconnect Virtual Chassis Members
You can use the following ports to connect Virtual Chassis members:
•
On EX4200 switches:
•
The dedicated Virtual Chassis ports (VCPs) on each switch
•
SFP, SFP+, or XFP uplink module ports configured as VCPs
•
SFP network ports on EX4200-24F switches configured as VCPs
•
On EX4500 switches:
•
The dedicated VCPs on the Virtual Chassis module
•
SFP+ network ports configured as VCPs
143Copyright © 2015, Juniper Networks, Inc.
To Next Page
Loading...
Need help?
General
