Figure 55: Removing a Fan Tray from an EX4200 Switch
NOTE: When a fan tray is removed, Fan/Blower is Absent is logged in the
system log and the system raises a minor alarm.
Related
Documentation
• Installing a Fan Tray in an EX4200 Switch on page 207
• Installing and Removing EX4200 Switch Hardware Components on page 169
• Cooling System and Airflow in an EX4200 Switch on page 31
• Field-Replaceable Units in EX4200 Switches on page 10
• Rear Panel of an EX4200 Switch on page 12
209Copyright © 2015, Juniper Networks, Inc.
Chapter 16: Replacing Cooling System Component
To Next Page
Loading...
