Juniper EX4200

Table 57: Packing List for an EX4200 Switch
QuantityComponent
1Switch
1 preinstalledEX4200-24T, EX4200-24T-DC,
EX4200-24P, EX4200-24PX,
EX4200-24F, EX4200-24F-DC,
EX4200-48T, EX4200-48T-DC,
EX4200-48P, and EX4200-48PX
switches.
Fan tray
Fan tray for these models are not shipped by default; you
must order them separately.
EX4200-24F-S and EX4200-48T-S
switches
1 (preinstalled only if your system order includes a 320 W
AC power supply)
EX4200-24T, EX4200-24T-DC,
EX4200-24P, EX4200-24PX,
EX4200-24F, EX4200-24F-DC,
EX4200-48T, EX4200-48T-DC,
EX4200-48P, and EX4200-48PX
switches.
Power supply
Power supplies for these models are not shipped by
default; you must order them separately.
EX4200-24F-S and EX4200-48T-S
switches
1EX4200-24T, EX4200-24T-DC,
EX4200-24P, EX4200-24PX,
EX4200-24F, EX4200-24F-DC,
EX4200-48T, EX4200-48T-DC,
EX4200-48P, and EX4200-48PX
switches.
AC power cord
appropriate for your
geographical location
(only for AC switch
models)
AC power cord for these models is not shipped by default;
you must order it separately.
EX4200-24F-S and EX4200-48T-S
switches
1EX4200-24T, EX4200-24T-DC,
EX4200-24P, EX4200-24PX,
EX4200-24F, EX4200-24F-DC,
EX4200-48T, EX4200-48T-DC,
EX4200-48P, and EX4200-48PX
switches.
Power cord retainer clip
(only for AC switch
models)
Power cord retainer clip for these models is not shipped
by default; you must order it separately.
EX4200-24F-S and EX4200-48T-S
switches
2Mounting brackets
8Mounting screws to attach the mounting brackets to the switch
chassis
4Rubber feet
1RJ-45 cable and RJ-45 to DB-9 serial port adapter
155Copyright © 2015, Juniper Networks, Inc.
Chapter 11: Unpacking the Switch