Juniper EX4200 User Manual

CHAPTER 32
Agency Approvals and Compliance
Statements
•
Agency Approvals for EX Series Switches on page 317
•
Compliance Statements for EMC Requirements for EX Series Switches on page 318
•
Compliance Statements for Acoustic Noise for EX Series Switches on page 322
Agency Approvals for EX Series Switches
This topic applies to hardware devices in the EX Series product family, which includes
EX Series switches, the EX Series Redundant Power System (RPS), and the XRE200
External Routing Engine.
These hardware devices comply with the following standards:
•
Safety
•
CAN/CSA-C22.2 No. 60950-1 Information Technology Equipment
•
UL 60950-1 Information Technology Equipment
•
EN 60950-1 Information Technology Equipment
•
IEC 60950-1 Information Technology Equipment
•
EN 60825-1 Safety of Laser Products - Part 1: Equipment classification and
requirements
•
EMC
•
FCC 47CFR Part 15 Class A (USA)
•
EN 55022 Class A Emissions (Europe)
•
ICES-003 Class A
•
VCCI Class A (Japan)
•
AS/NZS CISPR 22 Class A (Australia/New Zealand)
•
CISPR 22 Class A
•
EN 55024
•
EN 300386
317Copyright © 2015, Juniper Networks, Inc.

Juniper EX4200 Specifications

General

Model	EX4200
Switching Capacity	128 Gbps
Layer	Layer 2 and Layer 3
Form Factor	1U
Throughput	96 Mpps
Maximum VLANs	4096
MAC Address Table Size	16, 000
DRAM	1 GB
Flash Memory	1 GB
Forwarding Rate	96 Mpps
JUNOS Software	Yes
Ports	24 or 48
Stacking	Up to 10 switches in a Virtual Chassis configuration
Power Supply	AC or DC
Management	CLI, SNMP, J-Web
Input Voltage	100-240 VAC or -48 VDC
Operating Temperature	0°C to 45°C
Redundancy	Redundant power supplies
Virtual Chassis Technology	Yes
Storage Temperature	-40°C to 70°C
Humidity	5% to 90% non-condensing