Juniper EX4200

switch, follow instructions in “Removing a Power Supply from an EX4200 Switch” on
page 213.
To install a fan tray in an EX4200 switch, follow instructions in “Installing a Fan Tray in
an EX4200 Switch” on page 207. To remove a fan tray from an EX4200 switch, follow
instructions in “Removing a Fan Tray from an EX4200 Switch” on page 208.
To install an uplink module in an EX4200 switch, follow instructions in “Installing an
Uplink Module in an EX4200 Switch” on page 215. To remove an uplink module from an
EX4200 switch, follow instructions in “Removing an Uplink Module from an EX4200
Switch” on page 217.
To install an SFP, SFP+, or XFP transceiver in an EX4200 switch, follow instructions in
“Installing a Transceiver in an EX Series Switch” on page 221. To remove an SFP, SFP+,
or XFP transceiver from an EX4200 switch, follow instructions in “Removing a Transceiver
from a Switch” on page 223.
Related
Documentation
• Cooling System and Airflow in an EX4200 Switch on page 31
• Power Supply in EX4200 Switches on page 33
• Uplink Modules in EX4200 Switches on page 18
• Pluggable Transceivers Supported on EX4200 Switches on page 81
Copyright © 2015, Juniper Networks, Inc.170
EX4200 Switch Hardware Guide