Juniper EX4200 User Manual

•
See Locating the Serial Number on an EX4300 Switch or Component
•
See Locating the Serial Number on an EX4500 Switch or Component
•
See Locating the Serial Number on an EX4550 Switch or Component
•
See Locating the Serial Number on an EX4600 Switch or Component
•
See Locating the Serial Number on an EX6200 Switch or Component
•
See Locating the Serial Number on an EX8200 Switch or Component
•
See Locating the Serial Number on an EX9204 Switch or Component
•
See Locating the Serial Number on an EX9208 Switch or Component
•
See Locating the Serial Number on an EX9214 Switch or Component
•
See Locating the Serial Number on an XRE200 External Routing Engine or Component
•
See Locating the Serial Number on an EX Series Redundant Power System or Redundant
Power System Components
•
See Locating the Serial Number on an OCX1100 Switch or Component
Before you request an RMA from JTAC, be prepared to provide the following information:
•
Your existing case number, if you have one
•
Serial number of the component
•
Your name, organization name, telephone number, fax number, and shipping address
•
Details of the failure or problem
•
Type of activity being performed on the switch when the problem occurred
•
Configuration data displayed by one or more show commands
You can contact JTAC 24 hours a day, seven days a week on the Web or by telephone:
•
Case Manager at CSC: http://www.juniper.net/cm/
•
Telephone: +1-888-314-JTAC1-888-314-5822, toll free in U.S., Canada, and Mexico
NOTE: For international or direct-dial options in countries without toll free
numbers, see http://www.juniper.net/support/requesting-support.html .
If you are contacting JTAC by telephone, enter your 11-digit case number followed by the
pound (#) key for an existing case, or press the star (*) key to be routed to the next
available support engineer.
The support representative validates your request and issues an RMA number for return
of the component.
Related
Documentation
Packing an EX2200 Switch or Component for Shipping•
• Packing an EX3200 Switch or Component for Shipping
Copyright © 2015, Juniper Networks, Inc.248
EX4200 Switch Hardware Guide

Juniper EX4200 Specifications

General

Model	EX4200
Switching Capacity	128 Gbps
Layer	Layer 2 and Layer 3
Form Factor	1U
Throughput	96 Mpps
Maximum VLANs	4096
MAC Address Table Size	16, 000
DRAM	1 GB
Flash Memory	1 GB
Forwarding Rate	96 Mpps
JUNOS Software	Yes
Ports	24 or 48
Stacking	Up to 10 switches in a Virtual Chassis configuration
Power Supply	AC or DC
Management	CLI, SNMP, J-Web
Input Voltage	100-240 VAC or -48 VDC
Operating Temperature	0°C to 45°C
Redundancy	Redundant power supplies
Virtual Chassis Technology	Yes
Storage Temperature	-40°C to 70°C
Humidity	5% to 90% non-condensing