Juniper EX4600 Series

CHAPTER 11
Compliance
•
Agency Approvals for EX Series Switches on page 83
•
Compliance Statements for EMC Requirements for EX Series Switches on page 84
•
Declaration of Conformity for EX4600 Switch on page 88
Agency Approvals for EX Series Switches
This topic applies to hardware devices in the EX Series product family, which includes
switches, the EX Series Redundant Power System (RPS), and the XRE200 External
Routing Engine.
These hardware devices comply with the following standards:
•
Safety
•
CAN/CSA-C22.2 No. 60950-1 Information Technology Equipment
•
UL 60950-1 Information Technology Equipment
•
EN 60950-1 Information Technology Equipment
•
IEC 60950-1 Information Technology Equipment
•
EN 60825-1 Safety of Laser Products - Part 1: Equipment classification and
requirements
•
EMC
•
FCC 47CFR Part 15 Class A (USA)
•
EN 55022 Class A Emissions (Europe)
•
ICES-003 Class A
•
VCCI Class A (Japan)
•
AS/NZS CISPR 22 Class A (Australia/New Zealand)
•
CISPR 22 Class A
•
EN 55024
•
EN 300386
•
EN 61000-3-2 Power Line Harmonics
83Copyright © 2014, Juniper Networks, Inc.