NOTE: In North America, AC power cords must not exceed 4.5 meters
(approximately 14.75 feet) in length, to comply with National Electrical Code
(NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52 and Canadian Electrical
Code (CEC) Section4-010(3). The cords that can be ordered for the EX4600
switch are in compliance.
Table 33 on page 80 lists AC power cord specifications provided for each country or
region.
Table 33: AC Power Cord Specifications
GraphicJuniper Model NumberPlug StandardsElectrical SpecificationsCountry/Region
CBL-GP-C13-AUAS/NZ 3109-1996250 VAC, 10 A, 50 HzAustralia
CBL-GP-C13-CHGB 1002-1996250 VAC, 10 A, 50 HzChina
CBL-GP-C13-EUCEE (7) VII250 VAC, 10 A, 50 HzEurope (except Italy,
Switzerland, and United
Kingdom)
CBL-GP-C13-ITCEI 23-16/VII250 VAC, 10 A, 50 HzItaly
CBL-GP-C13-JPJIS C8303125 VAC, 12 A, 50 Hz or 60 HzJapan
CBL-GP-C13-USCAN/CSA No. 49-92125 VAC, 13 A, 60 HzNorth America
CBL-GP-C13-KRKSC 8305; K60884-1250 VAC, 10 A, 60 HzSouth Korea
CBL-GP-C13-SEV 1011 SEV 1991; EN
60320 C13
250 VAC, 10 A, 50 HzSwitzerland
CBL-GP-C13-UKBS 1363/A250 VAC, 10 A, 50 HzUnited Kingdom
Related
Documentation
AC Power Supply in an EX4600 Switch on page 23•
• General Safety Guidelines and Warnings on page 91
• General Electrical Safety Guidelines and Warnings on page 119
• Prevention of Electrostatic Discharge Damage on page 120
Copyright © 2014, Juniper Networks, Inc.80
EX4600 Switch Hardware Guide