Juniper EX4600 Series

Nonregulatory Environmental Standards
NEBS compliance—These EX Series switches are Network Equipment Building System
(NEBS) compliant:
•
EX2200-24T and EX2200-48T
•
EX3200-24T, EX3200-48T
•
EX3300-24T, EX3300-48T
•
EX4200-24F, EX4200-24T, and EX4200-48T
•
EX4300-24T, EX4300-24P, EX4300-48T, EX4300-48T-AFI, and EX4300-48P
•
All EX4500 switches with AC power supplies
•
EX4550-32T-AFO, EX4550-32T-AFI, EX4550-32F-AFO, and EX4550-32F-AFI
•
EX4600-40F
•
All EX6200 switches
NOTE: For the EX6200-48P line cards, the intra-building ports must use
shielded intra-building cabling or wiring that is grounded at both ends.
•
All EX8200 switches
Those switch switches meet the following NEBS compliance standards:
•
SR-3580 NEBS Criteria Levels (Level 3 Compliance)
•
GR-1089-CORE:EMC and Electrical Safety for NetworkTelecommunicationsEquipment
•
GR-63-CORE: NEBS, Physical Protection
•
The equipment is suitable for installation as part of the Common Bonding Network
(CBN).
•
The equipment is suitable for installation in locations where the National Electrical
Code (NEC) applies.
•
The battery return connection is to be treated as an Isolated DC return (DC-I), as
defined in GR-1089-CORE.
Related
Documentation
Agency Approvals for EX Series Switches on page 83•
• Compliance Statements for Acoustic Noise for EX Series Switches
87Copyright © 2014, Juniper Networks, Inc.
Chapter 11: Compliance