Juniper EX4600 Series User Manual

CHAPTER 17
Connecting the EX4600 Device
•
Connecting Earth Ground to an EX4600 Switch on page 146
•
Connecting AC Power to an EX4600 Switch on page 147
•
Connecting DC Power to an EX4600 Switch on page 149
•
Connecting an EX Series Switch to a Management Console on page 153
•
Connecting an EX4600 Switch to a Network for Out-of-Band Management on page 155
•
Connecting EX4600 Switches in a Virtual Chassis on page 156
145Copyright © 2014, Juniper Networks, Inc.

Juniper EX4600 Series Specifications

General

Product Series	EX4600
10GbE ports	24 or 48
Cooling	Front-to-back or back-to-front airflow
Rack Units	1 U
Virtual Chassis	Up to 10 members
MAC address table size	288, 000 entries
Memory	8 GB DRAM
Layer 3 Routing	Yes
AC Power Input	100-240V AC
Ports	24 or 48 x 10GbE ports
40GbE ports	4
100GbE ports	0
Power Supply	Dual redundant, hot-swappable AC or DC
Jumbo frames	9216 bytes
Operating temperature	0°C to 45°C
Input voltage	100-240 VAC, -40 to -72 VDC
Operating relative humidity	5% to 90% noncondensing
Fans	Redundant
JUNOS OS	Junos OS
Storage	16 GB flash
DC Power Input	-40 to -72 VDC