Juniper EX4600 Series

Figure 35: Removing a Fan Module from an EX4600 Switch
QFX5100-48S
RUNNING JUN OS
NOTE: When a fan moduleis removed,the CLI message Fan/Blower is Absent
is logged in the system log, and the system raises a minor alarm.
Related
Documentation
• Cooling System and Airflow in an EX4600 Switch on page 13
• Field-Replaceable Units in an EX4600 Switch on page 6
• Management Panel of an EX4600 Switch on page 9
• Installing a Fan Module in an EX4600 Switch on page 174
177Copyright © 2014, Juniper Networks, Inc.
Chapter 20: Replacing Components