1. Have one person support the weight of the switch while another person uses the
screwdriver to remove the front mounting screws that attach the chassis mounting
brackets to the rack or cabinet.
2. Remove the EX4600 switch from the rack or cabinet.
3. Use the screwdriver to remove the mounting screws that attach the mounting blades
attached to the rear of the rack or cabinet.
4. Place the removed screws and mounting blades in a labeled bag. You will need them
when you reinstall the chassis.
5. Transport the EX4600 switch to your desired new location.
Related
Documentation
• Mounting an EX4600 Switch in a Rack or Cabinet on page 141
Copyright © 2014, Juniper Networks, Inc.166
EX4600 Switch Hardware Guide
To Next Page
Loading...
