Juniper EX4600 Series User Manual

•
See Locating the Serial Number on an EX6200 Switch or Component
•
See Locating the Serial Number on an EX8200 Switch or Component
•
See Locating the Serial Number on an EX9204 Switch or Component
•
See Locating the Serial Number on an EX9208 Switch or Component
•
See Locating the Serial Number on an EX9214 Switch or Component
•
See Locating the Serial Number on an XRE200 External Routing Engine or Component
•
See Locating the Serial Number on an EX Series Redundant Power System or Redundant
Power System Components
Before you request an RMA from JTAC, be prepared to provide the following information:
•
Your existing case number, if you have one
•
Serial number of the component
•
Your name, organization name, telephone number, fax number, and shipping address
•
Details of the failure or problem
•
Type of activity being performed on the switch when the problem occurred
•
Configuration data displayed by one or more show commands
You can contact JTAC 24 hours a day, seven days a week on the Web or by telephone:
•
Case Manager at CSC: http://www.juniper.net/cm/
•
Telephone: +1-888-314-JTAC1-888-314-5822, toll free in U.S., Canada, and Mexico
NOTE: For international or direct-dial options in countries without toll free
numbers, see http://www.juniper.net/support/requesting-support.html .
If you are contacting JTAC by telephone, enter your 11-digit case number followed by the
pound (#) key for an existing case, or press the star (*) key to be routed to the next
available support engineer.
The support representative validates your request and issues an RMA number for return
of the component.
Related
Documentation
• Packing an EX2200 Switch or Component for Shipping
• Packing an EX3200 Switch or Component for Shipping
• Packing an EX3300 Switch or Component for Shipping
• Packing an EX4200 Switch or Component for Shipping
• Packing an EX4200 Switch or Component for Shipping
• Packing an EX4300 Switch or Component for Shipping
• Packing an EX4500 Switch or Component for Shipping
Copyright © 2014, Juniper Networks, Inc.208
EX4600 Switch Hardware Guide

Juniper EX4600 Series Specifications

General

Product Series	EX4600
10GbE ports	24 or 48
Cooling	Front-to-back or back-to-front airflow
Rack Units	1 U
Virtual Chassis	Up to 10 members
MAC address table size	288, 000 entries
Memory	8 GB DRAM
Layer 3 Routing	Yes
AC Power Input	100-240V AC
Ports	24 or 48 x 10GbE ports
40GbE ports	4
100GbE ports	0
Power Supply	Dual redundant, hot-swappable AC or DC
Jumbo frames	9216 bytes
Operating temperature	0°C to 45°C
Input voltage	100-240 VAC, -40 to -72 VDC
Operating relative humidity	5% to 90% noncondensing
Fans	Redundant
JUNOS OS	Junos OS
Storage	16 GB flash
DC Power Input	-40 to -72 VDC