Juniper EX4600 Series User Manual

Table 28: Interface Specifications for Active Copper QSFP+ DAC Cables (continued)
SpecificationsProduct Number
40-Gbps full-duplex serial transmissionRateJNP-QSFP-DAC-10MA
Copper pigtailConnector type
3.3 VSupply voltage
0.058 WPower consumption
–40
°
C to 85
°
CStorage temperature
TwinaxCable type
28 AWGWire AWG
0.3 in. (0.762 cm)Minimum cable bend radius
100 ohmsCable characteristic impedance
2 % maximumCrosstalk between pairs
4.3 nsec/mTime delay
10 m (32.8 ft)Length
Related
Documentation
• Interface Specifications for SFP, SFP+, and QSFP+ Transceivers for the EX4600 Switch
on page 49
• Interface Specifications for SFP, SFP+, and QSFP+ Transceivers for the EX4600 Switch
on page 49
• Interface Specifications for QSFP+ DAC Breakout Cables for the EX4600 Switch on
page 65
• Installing a Transceiver in an EX Series Switch on page 182
• Removing a Transceiver from an EX Series Switch on page 179
Copyright © 2014, Juniper Networks, Inc.72
EX4600 Switch Hardware Guide

Juniper EX4600 Series Specifications

General

Brand	Juniper
Model	EX4600 Series
Category	Switch
Language	English