KAESER SIGMA CONTROL 2 Service Manual

Line Submenu/Segment/Text
3 Text:
■ Message text
■ –
Tab. 86 Information of a message
Message type and status are shown abbreviated.
Segment Display Meaning
Message number 0059 (example) Message 0059
Type of message W Warning and maintenance message
A Alarm
Message status c Message has come
g Message gone
a Message acknowledged
Date 04/13/20 (example) Date
Time 08:15:37AM (example) Time
Tab. 87 Message abbreviations
9.4.1 Status – Messages menu
1. Open the 1.1 <Status – Messages > menu.
The Messages menu is displayed
The number of current faults and warnings is displayed in the two bottom lines.
4 0 0 m b a r 0 8 : 1 5 A M 8 0 ° C
Header
1.1 Messages
Menu
▶1 Current messages
active line
▶2 Messages history
▶3 Address error
------------------------------
current Alarms 2
Number of currently registered faults
Warnings 1
Number of currently registered warnings
9 Operation
9.4 Displaying messages
138
Service Manual Controller
SIGMA CONTROL 2 BLOWER ≥ 2.5.3 No.: 901700 10 E

KAESER SIGMA CONTROL 2 Specifications

General

Controller Type	Microprocessor-based
Model	SIGMA CONTROL 2
Manufacturer	KAESER
Input Voltage	24 V DC
Protection Class	IP54
Communication Protocols	Modbus, Profibus
Data Logging	Comprehensive data logging
Remote Monitoring	Yes
Communication Interface	Ethernet