KAESER SIGMA CONTROL 2 Service Manual

Menu No./Designation Function/Sub-menu
1.4 Current operating mode Idle time Rest
Load signal
Source/value
Acknowledge messages
Set pressure
Actual pressure
Set speed
Set value
Actual value
3)
only visible in the event of parametrisation error
Tab. 41 Status menu
5.7.2.2 Configuration menu
Menu No./Designation Function/Sub-menu
5.1 General ■ System information
─ SIGMA CONTROL 2 - MCS
Software
KAESER:PN/SN
Controller manufacturer:PN/SN
MFGDT (Manufacturing date)
─ Blower package
EN (Equipment number)
PN (Material number)
SN (Serial number)
Speed stage
─ IO modules
First IOM
Second IOM
─ FC information
─ IOM type selection
Model:
Date/Time
Time zone
■ Time server
─ active:
─ IP address
Date format
Time format
Pressure unit
Temperature unit
Display illumination
1)
Power switching with frequency converter (OFC/SFC)
5 Design and Function
5.7 Menu overview
34
Service Manual Controller
SIGMA CONTROL 2 BLOWER ≥ 2.5.3 No.: 901700 10 E

KAESER SIGMA CONTROL 2 Specifications

General

Controller Type	Microprocessor-based
Model	SIGMA CONTROL 2
Manufacturer	KAESER
Input Voltage	24 V DC
Protection Class	IP54
Communication Protocols	Modbus, Profibus
Data Logging	Comprehensive data logging
Remote Monitoring	Yes
Communication Interface	Ethernet