7. Use «Up» or «Down» to select a menu item in the
General
sub-menu such as
System
information
.
8. Press «Escape» repeatedly to leave this menu.
8.2.2 Setting the language
You can set the user interface to one of these languages:
Arabic Estonian Italian Norwegian Spanish
Bulgarian Finnish Japanese Polish Spanish
(South America)
Chinese French Korean Portuguese Czech
Danish French
(Canada)
Croatian Romanian Turkish
German Greek Latvian Russian Hungarian
English Hebrew Lithuanian Swedish ...
English (USA) Indonesian Dutch Slovenian ...
Tab. 50 Supported languages
Depending on the selected language, the system automatically sets the units and the time
and date formats. You can manually change these settings (see chapter 8.2.10).
Precondition The operating mode is displayed.
1. Press «Enter».
The Main menu is displayed.
4 0 0 m b a r 0 8 : 1 5 A M 8 0 ° C
Header
Main menu
----------------English GB----------------
Current language
▶1 Status
active line
▶2 Performance data
Sub-menu
▶3 Operating data
Sub-menu
▶4 Maintenance
Sub-menu
▶5 Configuration
Sub-menu
2. Press «Up» key.
The currently set language is displayed.
4 0 0 m b a r 0 8 : 1 5 A M 8 0 ° C
Header
Main menu
----------------English GB----------------
Active line with current set language
▶1 Status
Sub-menu
▶2 Performance data
Sub-menu
▶3 Operating data
Sub-menu
▶4 Maintenance
Sub-menu
▶5 Configuration
Sub-menu
8 Initial Start-up
8.2 Setting the controller
50
Service Manual Controller
SIGMA CONTROL 2 BLOWER ≥ 2.5.3 No.: 901700 10 E
To Next Page
Loading...
Need help?
General