Fig. 27
User management
menu
6. Enter a new user name in the
User name:
field.
7. Enter a new password in the
Password:
field.
8. Re-enter the same new password in the
Repeat password:
field.
9. Set Level 2 in the
Access level:
field.
10. Set the
State:
option in the Enabled field.
11. Click Add.
The new user name has been added to the user list.
Result A new user account has been created and activated.
Editing a user account
You can edit existing user accounts:
■ Changing the password
■ Changing the access level
■ Changing the status
Example: Change the password for an existing user account.
Precondition The
User management
menu is displayed
Write mode is activated.
1. Click the required user account in the list.
2. Enter a new password in the
Password:
field.
3. Re-enter the same new password in the
Repeat password:
field.
4. Click Update user.
8 Initial Start-up
8.3 KAESER CONNECT benefits
76
Service Manual Controller
SIGMA CONTROL 2 BLOWER ≥ 2.5.3 No.: 901700 10 E
To Next Page
Loading...
Need help?
General