KAESER SIGMA CONTROL 2 Service Manual

Result The password for the existing user account is changed.
8.3.7 Settings menu
These settings are only required for access to KAESER CONNECT via web browser.
The following settings are possible.
■ Units
■ Date format
■ Time format
Fig. 28 Settings menu
For example, you want to convert your units to US values:
Precondition KAESER CONNECT for SIGMA CONTROL 2 is displayed.
1. Click the Settings menu element.
2. Click the arrow key for the unit of pressure.
A selection list of units of pressure is displayed.
3. Set the appropriate pressure unit (psi).
4. Click the arrow key for the unit of temperature.
A selection list of units of temperature is displayed.
5. Set the appropriate temperature unit (°F).
6. Set additional units and date and time formats.
8 Initial Start-up
8.3 KAESER CONNECT benefits
No.: 901700 10 E
Service Manual Controller
SIGMA CONTROL 2 BLOWER ≥ 2.5.3
77

KAESER SIGMA CONTROL 2 Specifications

General

Controller Type	Microprocessor-based
Model	SIGMA CONTROL 2
Manufacturer	KAESER
Input Voltage	24 V DC
Protection Class	IP54
Communication Protocols	Modbus, Profibus
Data Logging	Comprehensive data logging
Remote Monitoring	Yes
Communication Interface	Ethernet