KAESER SIGMA CONTROL 2 Service Manual

5.7.2.3 Communication menu
Menu No./Designation Function/Sub-menu
8.1 Ethernet/SIGMA NETWORK ■ IP configuration
─ IP address
─ Subnet mask
─ Gateway
─ DNS Server 1
─ DNS Server 2
─ Restart network
■ Connections
─ SIGMA CONTROL 2
─ SAM 4.0
Restart
Timeout
Cycle time
For details of the Connections menu, please see
table 44.
■ E-mail
─ active:
Blower number:
Language:
─ Sender address:
Sender name:
Contact telephone:
Receiver address:
─ SMTP server:
User name:
Password
─ Port/Timeout
Repeat cut-off time:
MAC: MAC address
8.2 Com-Module The content of the menu depends on the type of
the communication module identified.
The following KAESER communications mod‐
ules may be used:
■ PROFIBUS
■ Modbus
■ Modbus TCP
■ DeviceNet
■ PROFINET
■ EtherNet/IP
Tab. 43 Communication menu
5 Design and Function
5.7 Menu overview
No.: 901700 10 E
Service Manual Controller
SIGMA CONTROL 2 BLOWER ≥ 2.5.3
37

KAESER SIGMA CONTROL 2 Specifications

General

Controller Type	Microprocessor-based
Model	SIGMA CONTROL 2
Manufacturer	KAESER
Input Voltage	24 V DC
Protection Class	IP54
Communication Protocols	Modbus, Profibus
Data Logging	Comprehensive data logging
Remote Monitoring	Yes
Communication Interface	Ethernet