KAESER SIGMA CONTROL 2 - Sensors; Communication Modules; Tab. 15 Degree of Protection, IOM; Tab. 16 IOM Dimensions

3.1.2.3 Degree of protection, input/output module
Characteristic Value
Degree of protection within the machine IP 54
Degree of protection within the control cabinet IP 20
Tab. 15 Degree of protection, IOM
3.1.2.4 Dimensions, input/output module
Characteristic Value
Width [mm] 125
Height [mm] 250
Depth [mm] 44
Tab. 16 IOM dimensions
3.1.3 Sensors
Pressure transducer
Characteristic Value
Output signal [mA] 0/4–20
Connection Two-core
Tab. 17 Pressure transducer
Resistance thermometer
Characteristic Value
Sensing resistance (to DIN IEC 751) PT100
Connection Two-core
Tab. 18 Resistance thermometer
3.2 Communication modules
SIGMA CONTROL 2 supports the following communication modules:
■ PROFIBUS (Option C41)
■ Modbus (Option C42)
■ DeviceNet (Option C43)
■ Modbus TCP (Option C44)
■ PROFINET (Option C45)
■ EtherNet/IP (Option C50)
3 Technical Specifications
3.2 Communication modules
12
Service Manual Controller
SIGMA CONTROL 2 BLOWER ≥ 2.5.3 No.: 901700 10 E