KAESER SIGMA CONTROL 2 Service Manual

8.2.1 Selecting menu options
All menu options can be selected with the «Down», «Up» and «Enter» keys.
Example: Select the < Configuration – General > menu option
1. Switch on the machine and wait for SIGMA CONTROL 2 to start.
The operating mode is displayed.
Fig. 11 Operating mode
2. Press «Enter».
The Main menu is displayed.
4 0 0 m b a r 0 8 : 1 5 A M 8 0 ° C
Header
Main menu
----------------English GB----------------
Current language
▶1 Status
Sub-menu
▶2 Performance data
Sub-menu
▶3 Operating data
Sub-menu
▶4 Maintenance
Sub-menu
▶5 Configuration
Active line
3. Use «Up» or «Down» to select the Configuration line.
4. Press «Enter».
The Configuration menu is displayed
5. Use «Up» or «Down» to select the General line.
6. Press «Enter».
The General menu is displayed
4 0 0 m b a r 0 8 : 1 5 A M 8 0 ° C
Header
5.1 General
Menu
▶1 System information
Sub-menu
······························
Model: XXXXXX
set machine type
······························
Date/Time
04/13/20 08:15:37AM
current date and time
8 Initial Start-up
8.2 Setting the controller
No.: 901700 10 E
Service Manual Controller
SIGMA CONTROL 2 BLOWER ≥ 2.5.3
49

KAESER SIGMA CONTROL 2 Specifications

General

Controller Type	Microprocessor-based
Model	SIGMA CONTROL 2
Manufacturer	KAESER
Input Voltage	24 V DC
Protection Class	IP54
Communication Protocols	Modbus, Profibus
Data Logging	Comprehensive data logging
Remote Monitoring	Yes
Communication Interface	Ethernet