KAESER SIGMA CONTROL 2 Service Manual

3. Press «Up».
The check box is activated.
4 0 0 m b a r 0 8 : 1 5 A M 8 0 ° C
Header
5.6 Save data
Menu
Language: en_GB English
······························
Save data : ☑
······························
Eject SD card : ☑
Active line
Status recognised
4. Press the «Enter» key.
A security query is displayed.
5. Press «Enter».
Result The SD card is securely logged off from the electronic control and can be removed without the risk
of data loss.
9.9.1 Format SD card
Precondition The operating mode is displayed
The machine has been switched off with the «OFF» key
The EMERGENCY STOP command device has been actuated
1. Open the 5.6 <Configuration – Save data> menu.
2. Use «Up» or «Down» to select the Format SD card line.
3. Press «Enter».
The check box Format SD card will flash.
4. Press «Up».
The check box is activated.
4 0 0 m b a r 0 8 : 1 5 A M 8 0 ° C
Header
5.6 Save data
Menu
Save data : ☑
······························
Eject SD card : ☐
Status recognised
······························
Format SD card : ☑
Active line
5. Press the «Enter» key.
A security query is displayed.
6. Press «Enter».
SD card being formatted.
9 Operation
9.9 Save data
150
Service Manual Controller
SIGMA CONTROL 2 BLOWER ≥ 2.5.3 No.: 901700 10 E

KAESER SIGMA CONTROL 2 Specifications

General

Controller Type	Microprocessor-based
Model	SIGMA CONTROL 2
Manufacturer	KAESER
Input Voltage	24 V DC
Protection Class	IP54
Communication Protocols	Modbus, Profibus
Data Logging	Comprehensive data logging
Remote Monitoring	Yes
Communication Interface	Ethernet