KAESER SIGMA CONTROL 2 Service Manual

Fig. 24 I/O display (illustration similar)
➤ Click the I/O display menu element.
The current measured data and states of the input/output modules are displayed.
8.3.6 User management menu
Use the User management menu to create additional user accounts for other employees.
In order to be able to create user accounts, you must activate the write mode. The system will
prompt you to enter and confirm your user name and your password. Subsequently, the write
mode is activated (see Chapter 8.2.5).
The write mode is granted only to one person at a time.
If a second user attempts to log on in write mode, he will be refused by the system.
The system will return an error message.
String length for personally created user names and passwords:
■ User name: 6 to 16 characters, the second character must not be a number
■ Password: 6 to 16 characters
Precondition The generated password is available.
KAESER CONNECT for SIGMA CONTROL 2 is displayed.
8 Initial Start-up
8.3 KAESER CONNECT benefits
74
Service Manual Controller
SIGMA CONTROL 2 BLOWER ≥ 2.5.3 No.: 901700 10 E

KAESER SIGMA CONTROL 2 Specifications

General

Controller Type	Microprocessor-based
Model	SIGMA CONTROL 2
Manufacturer	KAESER
Input Voltage	24 V DC
Protection Class	IP54
Communication Protocols	Modbus, Profibus
Data Logging	Comprehensive data logging
Remote Monitoring	Yes
Communication Interface	Ethernet