KAESER SIGMA CONTROL 2 - I;O display menu

Fig. 17 KAESER CONNECT for SIGMA CONTROL 2
6. Click the arrow key 1 to open Select language:.
The Select language: window is displayed.
Fig. 18 Select language: window
1 «Arrow key» Select language:
2 Select language: window
3 Setting the language
4 Selected language
7. Click to set the selected language 3 .
Result KAESER CONNECT is displayed in the set language.
8.3.2 System status menu
Precondition KAESER CONNECT for SIGMA CONTROL 2 is displayed.
8 Initial Start-up
8.3 KAESER CONNECT benefits
No.: 901700 10 E
Service Manual Controller
SIGMA CONTROL 2 BLOWER ≥ 2.5.3
69