KAESER SIGMA CONTROL 2 - Closing KAESER CONNECT

Fig. 25 User management menu
1. Click the User management menu element.
2. Click read => write to activate the read/write mode.
The Log on for write access: window is displayed.
Fig. 26 Log on for write access: window
3. Enter your user name in the User name: field.
4. Enter your password in the Password: field.
5. Click OK.
The User management menu is displayed
8 Initial Start-up
8.3 KAESER CONNECT benefits
No.: 901700 10 E
Service Manual Controller
SIGMA CONTROL 2 BLOWER ≥ 2.5.3
75