KAESER SIGMA CONTROL 2 Service Manual

8 Initial Start-up
8.1 Outline
SIGMA CONTROL 2 was designed and developed for a number of applications. The settings that
can be made are correspondingly varied.
It is possible that only a few of these settings are needed for the initial start-up. This depends on
the application.
8.2: Setting the controller (display format, units, languages, etc.)
8.3: KAESER CONNECT benefits
8.4: Displaying and setting the blower properties
8.5: Machine start and stop
8.6: Operating modes in frequency-controlled machines
8.7: Setting the machine for master control operation
8.8: Setting the external input signal
8.9: Activating remote acknowledgement
8.10: Error behaviour
8.11: Commissioning the machine
8.2 Setting the controller
The following chapters describe in detail the basic settings for the SIGMA CONTROL 2. The
quick installation guide at the beginning of this operating manual provides an overview of the
essential displays and operating elements, the main menu and important functions.
➤ Carry out settings as required:
■ 8.2.1: Selecting menu options (introduction)
■ 8.2.2: Setting the language
■ 8.2.3: Noting the user name
■ 8.2.4: User log-in with RFID Equipment Card
■ 8.2.5: Generating a password
■ 8.2.6: Manual user log-in
■ 8.2.7: Create the master RFID Equipment Card
■ 8.2.8: Checking/Setting time and date
■ 8.2.9: Setting the time zone (daylight saving time/winter time)
■ 8.2.10: Set display formats (date, time, units of pressure and temperature)
■ 8.2.11: Setting the display illumination
■ 8.2.12: Setting the contrast and the brightness
■ 8.2.13: Activating the remote control
■ 8.2.14: IP configuration
■ 8.2.15: Setting the e-mail function
■ 8.2.16: Setting the time server
■ 8.3.6: Creating a user account
8 Initial Start-up
8.1 Outline
48
Service Manual Controller
SIGMA CONTROL 2 BLOWER ≥ 2.5.3 No.: 901700 10 E

KAESER SIGMA CONTROL 2 Specifications

General

Controller Type	Microprocessor-based
Model	SIGMA CONTROL 2
Manufacturer	KAESER
Input Voltage	24 V DC
Protection Class	IP54
Communication Protocols	Modbus, Profibus
Data Logging	Comprehensive data logging
Remote Monitoring	Yes
Communication Interface	Ethernet