KAESER SIGMA CONTROL 2 - Pressure control; Control mode; Compressor start; Acknowledgement

Menu No./Designation Function/Sub-menu
5.2 Blower properties Altitude
Air pressure
Pressure version
Maximum pressure
Design pressure
Minimum pressure
5.3 Restart Automatic restart
Delay
5.4 Operating modes Current operating mode
■
Fixed speed
1)
─ n_min/n_max
─ Set speed
─ Actual speed
■
Pressure control
1)
─ Source actual pressure
─ Source set pressure
─ Local set pressure
─ KP
─ KI
─ Set pressure rise time
─ Ignore bus actual pressure
■
External values control
1)
─ Controller settings
─ Load control
xA
Load on/Load off
xB
Load on/Load off
─ xA/xB Clock
xA/xB RC
dt maintenance hours
Ramp up time
Ramp down time:
1)
Power switching with frequency converter (OFC/SFC)
5 Design and Function
5.7 Menu overview
No.: 901700 10 E
Service Manual Controller
SIGMA CONTROL 2 BLOWER ≥ 2.5.3
35