EasyManuals Logo
Home>Keithley>Multimeter>2010

Keithley 2010 User Manual

Keithley 2010
278 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
Inspection
The Model 2010 was carefully inspected electrically and mechanically before shipment.
After unpacking all items from the shipping carton, check for any obvious signs of physical
damage that may have occurred during transit. (Note: There may be a protective film over the
display lens, which can be removed.) Report any damage to the shipping agent immediately.
Save the original packing carton for possible future shipment. The following items are included
with every Model 2010 order:
Model 2010 Multimeter with line cord.
Safety test leads (Model 1751).
Accessories as ordered.
Certificate of calibration.
Model 2010 User's Manual (P/N 2010-900-00).
Model 2010 Service Manual (P/N 2010-902-00).
Model 2010 Support Software Disk including TestPoint run-time applications, TestPoint
instrument libraries for GPIB and RS-232, and QuickBASIC examples.
If an additional manual is required, order the appropriate manual package. The manual
packages include a manual and any pertinent addenda.
Options and accessories
The following options and accessories are available from Keithley for use with the
Model 2010.
Scanner cards
Model 2000-SCAN —
A ten-channel scanner card that installs in the option slot of the
Model 2010. Channels can be configured for two-pole or four-pole operation. Included are two
pairs of leads for connection to Model 2010 rear panel inputs (Keithley P/N CA-109).
Model 2001-TCSCAN —
A thermocouple scanner card that installs in the option slot of the
Model 2010. The card has nine analog input channels that can be used for high-accuracy, high-
speed scanning. A built-in temperature reference allows multi-channel, cold-junction
compensated temperature measurements using thermocouples.
General purpose probes
Model 1754 Universal Test Lead Kit
— Consists of one set of test leads (0.9m), two spade
lugs, two banana plugs, two hooks, and two alligator clips.
Model 8605 High Performance Modular Test Leads
— Consists of two high voltage
(1000V) test probes and leads. The test leads are terminated with a banana plug with a
retractable sheath on each end.
1-4 General Information

Table of Contents

Other manuals for Keithley 2010

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Keithley 2010 and is the answer not in the manual?

Keithley 2010 Specifications

General IconGeneral
BrandKeithley
Model2010
CategoryMultimeter
LanguageEnglish

Related product manuals