Keithley 2010

Table F-2
Coupled commands
Command Also changes To
:TRAC:POIN
:TRAC:CLE
:TRAC:FEED:CONT
:TRAC:FEED:CONT
NEV
NEV
Sense Subsystem Commands:
...:RANG:UPP
...:REF:ACQ
...:RANG:AUTO
...:REF
OFF
presently displayed reading
:ROUT:CLOS
:ROUT:OPEN:ALL
:ROUT:SCAN:INT
:ROUT:SCAN:LSEL
:ROUT:SCAN:LSEL
:ROUT:SCAN:LSEL
NONE
NONE
INT
... = Valid function command words (i.e., :VOLT:DC, :VOLT:AC, etc.)
IEEE-488 and SCPI Conformance Information F-3