12 FUNCTIONS LINKED TO A
VEHICLE 227
12.1 Turning the Transceiver ON or OFF
According
to the State of the Ignition Sense
Port (Ignition Sense) 227
Usage of the Ignition Sense Port 227
The Amount of Time Until the
Transceiver Is Turned OFF (Timed
Power-off) 228
12.2 Controlling Vehicle Operation According to
the State of the Horn Alert Port (Horn
Alert) 228
Conditions to Activate the Horn Alert 230
Horn Alert Logic Signal 232
Activating Horn Alert According to the
Microphone Hook (Off-hook Horn Alert) 233
Horn Alert Status When the Transceiver
Is Turned ON (Horn Alert Mode) 233
13 TRANSCEIVER DATA
PROTECTION WITH PASSWORD 234
13.1 Password for Transceiver Operation
(Transceiver Password) 234
13.2 Password When Reading Configuration
Data in a PC (Read Authorization
Password) 235
13.3 Password for Writing Configuration Data
(Overwrite Password) 236
14 ADJUSTING THE TIME ON THE
TRANSCEIVER 237
14.1 Displaying the Current Time 237
14.2 Adjusting the Time 238
15 MODE 240
15.1 Testing the Transmit and Receive
Capabilities
of the Transceiver (Panel Test
Mode) 240
15.2 Adjusting the Transmit and Receive
Capabilities of the Transceiver (Panel
Tuning Mode) 241
15.3 Copying the Configuration Data to Another
Transceiver (Clone Mode) 242
15.4 Changing the Configuration of the
Transceiver (Front Panel Programming
Mode) 243
15.5 Overwriting the Firmware (Firmware
Programming Mode) 244
15.6 Checking the Firmware Version
(Transceiver Information Mode) 245
15.7 Testing or Adjusting the Transmit and
Receive Capabilities of the Transceiver
(PC Test Mode/ PC Tuning Mode) 246
　
CONTENTS
Common FUNC (K, F)/Ver 2.20 v
CONTENTS INDEX
To Next Page
Loading...
Need help?
General
