OPERATION DETAILED CONTROLS AND GAUGES
3-43
q Press the wiper switch and washer switch to operate the
wipers and washer.
Even if the wiper switch or washer switch is pressed, the
camera image display screen does not switch to another
screen or return to the standard screen display.
Action When Warning is Generated When Displaying Camera Image
q If an error or alarm occurs while the camera image is being
displayed, the error monitor or alarm monitor is displayed
at the top left of the screen and flashes.
q When the error monitor or warning monitor is displayed,
press function switch F5 to return to the standard screen
and check the content of the error or warning display.
When the error monitor display is flashing, if a lever is not
operated for more than 10 seconds, the screen will auto-
matically return to the standard screen.
When the screen returns to the standard screen, error
monitor at the top left of the screen goes out and the error/
warning is displayed in the center of the screen.
q If an error monitor is displayed, move the machine, set it in
a safe posture, then have inspection carried out immedi-
ately.
To Next Page
Loading...
